Puget 3D

Recent work

A Three-Sword Holster, Overnight

ยท Delwin, Puget 3D

Some jobs come with a comfortable deadline. This one didn't: a cosplay holster that carries three katana sheaths, in black PLA, needed within a couple of days.

Short notice is fine. It just means the print has to come out right the first time, so the planning matters more than the printing.

The finished holster in matte black PLA on the printer's build plate: three sheath tubes fanned out above a curved hip plate

Starting from a bought design

The design is the Triple Sheath Holder / Hip Mount by WandererTJ on Etsy. It holds three replica sheaths at the angles a certain green-haired swordsman wears them, and threads onto a regular belt. Great design, and all credit to WandererTJ for it.

I like working from designs that were bought rather than copied. A purchase like this usually comes with a personal use license, which lets the buyer have one made for themselves, including by a print service like us, as long as we don't keep the file afterwards. So I print the one piece and delete the files once the job is done. If you buy designs online, it's worth a quick read of the license. Most creators are happy for you to get help printing.

Reading the fine print

The download included the designer's own print notes, and they mattered. The big one: print the tubes standing up, not lying down, or they'll snap when you spread them open to slide the sheaths in. They also called for supports from the bed only, 4 walls and a few extra top and bottom layers. I followed all of it.

Side view of the holster showing the slit that runs the length of each tube
Each tube has a slit along its length, so it can spread open to take a sheath.

My tweaks

I printed it on our two-nozzle Bambu Lab printer, which let me use a dedicated support material just where the supports touch the part. The supports pop right off and the underside comes out clean.

I also wanted it a bit tougher, since a holster gets tugged on all day. The trick is that the design relies on the tubes flexing a little, so I didn't want to make those stiffer. I switched the infill to gyroid at 20%, which strengthens the body and belt loop without touching how the tubes flex. Those mostly come down to the walls, which I left as the designer intended.

Done before breakfast

The print ran overnight in under 6 hours and was waiting on the plate in the morning. After removing the supports, smoothing the slit edges and giving each tube a flex test, it was ready to hand over, with time to spare before the deadline.

The holster seen end-on, with the smoothed edges of the slits on the two upper tubes
After cleanup: supports off and slit edges smoothed.

Got a design you want printed?

If you've bought a model and don't have a printer (or the time), send us a quote request. Short notice welcome (if we can accommodate).

Thanks to WandererTJ for a great design.

  • cosplay
  • PLA
  • rush order
  • print settings
Get a quote More recent work